Cobra King MIM Tour Irons 2020


Cobra King MIM Tour Irons Complete Review

When it comes to the new Cobra King MIM Tour Irons, it’s the Metal Injection Molding (MIM) technique. The MIM is the new name of the game. It is considered to be the game-changer in the golf club manufacturing industry. You may be wondering, “Why is there a need for this metal injection molding technique when forging and casting are doing good?” Well, the forging and casting get you the product manufacture. After the product is made, it is subjected to many other processes to make the product feel good.

However, feeling good is a relative term. Some golf players do find the golf club’s excellent feel but not the right feel at all. The Cobra King has just addressed this problem using the metal injection molding technique to give the club the best and right feel to the irons. Before we dive into the Cobra Golf King MIM tour irons, we must look into the differentiating factor: metal injection molding.

What is MIM and Why it should matter to a Golf Player

Metal Injection Molding (MIM) technique, as you guessed it right, is a molding method in which metal is injected into the mold to make the product. The MIM technique can be traced back to the molding of ceramics. In the middle of the 20th century, the MIM technique was utilized for ceramic products.

The MIM technique was then improved and patented in the 1980s by a famous scientist Wey Reich. Since then, the MIM technique is being used for making a variety of items, from household items, sports, automotive parts to many other industrial level items. The MIM technique is a preferable technique over other traditional methods of manufacturing. It is mainly because of the following reasons that the MIM technique is considered a better method.

1. The products manufactured from the MIM technique are more reliable and durable.

2. Since the products manufactured from the MIM technique are made in one piece, there are zero misalignment chances.

3. No screws, nuts, or bolts are required, as the product is in a single piece, so there are zero chances that a product requires any workshop visit for screw tightening or anything close to it.

4. The MIM technique process is repeatable and consistently produces the same dimensions’ products, with almost no loss.

5. Each piece produced using the MIM technique is the same. Therefore, even if the club is lost due to unforeseen circumstances, the new club is felt the same way. Thus, a player does not have to understand the behavior of the club much.

6. For Golf, using Irons made by MIM technique give golfers better, consistent performance and feel.

According to the official website page of Cobra King MIM Tour Irons, “The MIM process is an evolution in manufacturing that is used to create the most precise and intricate shapes. The result is our purest and softest feeling players iron that performs and looks unlike any other.” Therefore, with the cobra king mim tour irons, a golfer gets the right feel and the right consistency with which an excellent game is guaranteed as per the golf player’s expertise.

The Highlights of the Cobra King MIM Tour Irons 

The Cobra King MIM Tour Irons are among the bests in the market. They are manufactured precisely by using top of line precise Metal Injection Mold technique (MIM). MIM offers the most precise way of making precise irons. The MIM method is a better method than other traditional manufacturing methods, including the forging and casting methods.

It is worth mentioning here that the Cobra King engineers and designers have worked years to deliver softer tour irons, with soft feel and consistency across a broader range of attributes throughout an entire range of irons. The irons are softer and come in precisely shaped designs.

The new Cobra King MIM Irons are better than the irons made from traditional carbon steel forgings and casting because they are made from the MIM technology, which offers a lot better manufacturing in one piece without joints. 

MIM technology sets the stage for optimizing these attributes throughout the manufacturing process. The MIM technique of manufacturing allows the golf tour irons’ engineering in the shapes and curves that the golf players have not seen earlier.

The MIM technique gives the engineers leverage the molding method to produce a product that is one of the firsts in their line in terms of consistency, quality, and feeling. The manufacturers at Cobra King have achieved the softest feelings to the players while offering stability. The highlights of the Cobra King Tour Irons are as given below.

1.Tour-caliber cavity back

2. Compact shape

3. Sleek topline

4. High-density tungsten toe weight

5. The softest feeling for players

6. Stability for off-center hits

7. Choice of KBS $ Taper shaft for stiffness and a COBRA Lamkin Crossline Connect grip

The Specs of The New Cobra King MIM Tour Irons

Sharing and discussing the specs of a product gives the reader a total understanding of the product. It becomes a lot easier to compare with the other counterparts in the market and make the right decision. Therefore, in the following section, the specs are discussed.

Set Composition

The new Cobra King MIM Tour irons’ stock set composition consists of 7 irons, a GW, and a PW. The irons give golfers better performance across the set. It will not be exaggerated to say that they are one of the best offerings on the market. They are metal injected molded and thus have better consistency in shaping and give golfers better performance. The set will give golfers performance across the set of irons. Here are the details of the set composition.

Club 3

The specification Cobra King tour irons with MIM (club 3) are Loft (20.0 degree), Lie Angle (60.50 degrees), Offset in mm (3.8), Length with Arcos (39.50 degrees), Standard Length Non-Arcos (39.25 degrees), Steel Swing weight (D2), Steel Shaft Flex (S, R), RH/LH (RH). It is worth mentioning here that the Irons with MIM technology is better, softer than any forged iron, and give golfers better performance.

Club 4

The specification Cobra King tour irons with MIM (club 4) are Loft (23.0 degree), Lie Angle (61.00 degrees), Offset in mm (3.4), Length with Arcos (39.00 degrees), Standard Length Non-Arcos (38.75 degrees), Steel Swing weight (D2), Steel Shaft Flex (S, R), RH/LH (RH). As MIM technology is used in its manufacturing, they are among the bests in the market.

 Club 5

The specification Cobra King tour irons with MIM (club 5) are Loft (26.0 degrees), Lie Angle (61.60 degrees), Offset in mm (3.1), Length with Arcos (38.50 degrees), Standard Length Non-Arcos (38.25 degrees), Steel Swing weight (D2), Steel Shaft Flex (S, R), RH/LH (RH). As the club is produced using the MIM technology, it is softer than any forged club of similar specifications. In terms of softness and performance, they are one of the bests among its counterparts.

Club 6

The specification Cobra King tour irons with MIM (club 6) are Loft (29.0 degrees), Lie Angle (62.00 degrees), Offset in mm (2.9), Length with Arcos (38.00 degrees), Standard Length Non-Arcos (37.75 degrees), Steel Swing weight (D2), Steel Shaft Flex (S, R), RH/LH (RH). As the club is produced using the MIM technology, it is softer than any forged club of similar specifications. Before the use of the MIM technology by Cobra King, its counterparts offer better consistency. In terms of softness, performance, and consistency, they are among the best due to MIM technology in the manufacturing process.

Club 7

The specification Cobra King tour irons with MIM (club 7 ) are Loft (33.0 degrees), Lie Angle (62.50 degrees), Offset in mm (2.5), Length with Arcos (37.50 degrees), Standard Length Non-Arcos (37.25 degrees), Steel Swing weight (D2), Steel Shaft Flex (S, R), RH/LH (RH). As the club is produced using the MIM technology, it is softer than any forged club of similar specifications. Before the use of the MIM technology by Cobra King, its counterparts offer better consistency. In terms of consistency, they are among the best among their counterparts. They give golfers a better performance experience. With the inclusion and use of MIM technology, King Cobra, Golf and golfers are in the best harmony than ever before.

Club 8

The specification Cobra King tour irons with MIM (club 8) are Loft (37.0 degrees), Lie Angle (63.00 degrees), Offset in mm (2.3), Length with Arcos (37.00 degrees), Standard Length Non-Arcos (36.75 degrees), Steel Swing weight (D2), Steel Shaft Flex (S, R), RH/LH (RH). As the club is produced using the MIM technology, it is softer than any forged club of similar specifications. Before the use of the MIM technology by Cobra King, its counterparts offer better consistency. In terms of consistency, they are among the best. They give golfers a better performance experience. With the inclusion and use of MIM technology, King Cobra, Golf and golfers are in the best harmony than ever before. The MIM technology has enabled King Cobra to give better consistency in shaping the club. They are one of the best offerings on the market.

Club 9

The specification Cobra King tour irons with MIM (club 9) are Loft (41.0 degrees), Lie Angle (63.50 degrees), Offset in mm (2.1), Length with Arcos (36.50 degrees), Standard Length Non-Arcos (36.25 degrees), Steel Swing weight (D2), Steel Shaft Flex (S, R), RH/LH (RH). As the club is produced using the MIM technology, it is softer than any forged club of similar specifications. Before the use of the MIM technology by Cobra King, its counterparts offer better consistency. In terms of consistency, they are among the best among their counterparts. They give golfers a better performance experience. With MIM technology’s inclusion and use, King Cobra, Golf, and golfers are in the best harmony than ever before. It is the one reason why the King Cobra Tour clubs are termed as better players’ desires.

PW

The specification Cobra King pitching wedge (PW) with are Loft (45.0 degrees), Lie Angle (64.00 degrees), Offset in mm (1.9), Length with Arcos (36.25), Standard Length Non-Arcos (36.00 degrees), Steel Swing weight (D3), Steel Shaft Flex (S, R), RH/LH (RH). As the club is produced using the MIM technology, it is softer than any forged club of similar specifications. Before the use of the MIM technology by Cobra King, its counterparts offer better consistency. In terms of consistency, they are among the best among their counterparts. They give golfers performance experience. With the inclusion and use of MIM technology, King Cobra, Golf and golfers are in the best harmony than ever before. It is the one reason why the King Cobra Tour clubs are termed as better players, desires.

GW 

The specification Cobra King gap wedge (GW) with are Loft (50.0 degrees), Lie Angle (64.00 degrees), Offset in mm (), Length with Arcos (36.00 degrees), Standard Length Non-Arcos (37.75 degrees), Steel Swing weight (D3), Steel Shaft Flex (S, R), RH/LH (RH). As the club is produced using the MIM technology, it is softer than any forged club of similar specifications. Before the use of the MIM technology by Cobra King, its counterparts offer better consistency. They give golfers a better performance experience. With the inclusion and use of MIM technology, King Cobra, Golf and golfers are in the best harmony than ever before. 

SHAFTS 

The shafts available for the Cobra King tour irons with MIM technology are in models. The three models for the Cobra King tour irons with MIM technology are as given below:

  1. Model (KBS $ Taper in Chrome), Flex (Extra stiff), description (taper tip), weight (130 gram), launch (mid-low), and spin (low).
  2. Model (KBS $ Taper in Chrome), Flex (Stiff), description (taper tip), weight (120 gram), launch (mid-low), and spin (low).
  3. Model (KBS $ Taper in Chrome), Flex (Regular), description (taper tip), weight (110 gram), launch (mid-low), and spin (low).

  

GRIPS

The grip that fits the Cobra Golf King Tour Irons with MIM technology is COBRA Lamkin Crossline Connect – Black. The MIM process has little to do with the Grips available for the irons with MIM technology. However, the recommended COBRA Lamkin Crossline Connect in black color should be used to reap the maximum benefits of the MIM process employed for the irons with MIM technology.

 

PRICE

The price tag of Cobra King MIM Tour Irons starts from USD 1299 for standard cobra king tour irons. The price tag is justified by the Cobra King manufacturers, as they offer the product with consistent performance and better feel by using one of the latest techniques to manufacture them.

Pros and Cons of Cobra King MIM Tour Irons

The pros and cons provide a clear picture of what to expect from a product and make the decision-making process a lot easier. In the following section, the pros and cons of Cobra King MIM Tour Irons are discussed. 

Pros

1. The MIM technology has enabled Cobra King MIM Tour irons’ engineers to leverage the benefits of casting and forging together to give the irons one of the best feels that a golf player can have. The feel has been termed as the “buttery feel” by Cobra. 

2. The Cobra King MIM Tour irons are made in a single piece through a metal injection molding process, allowing greater consistency in the game. 

3. The designers have leveraged the MIM technology to shape the Cobra King MIM Tour irons for the golf course’s best use.

4. It has the most precise shape. Guess what? Since each piece is made from the MIM technology, each piece has the same dimensions whatsoever. It allows the player to adjust to any new piece, all at once. 

Cons

1. The price tag of the Cobra King MIM Tour irons is on the high side, enabling only a few thousand golfers to take advantage of the irons with the best feel. 

2. It will be challenging for a golf player to switch to another iron once s/he has used the Cobra King MIM tour irons for some time. 

Final Verdict

The MIM technology has enabled Cobra to give better consistency in shaping the club. They are one of the best offerings on the market. The Cobra King MIM Tour Irons manufactured using the MIM technology give golf players more significant performance than normal Irons. They are softer and come in precisely shaped designs. They have also been termed as pro players’ choice.

As the MIM technology offers better manufacturing, they are better than carbon steel forgings and casting. In Golf’s sport, regular and better players desire to have a softness in irons, fewer adjustments, and performance consistency. MIM technology sets the stage for optimizing these attributes throughout the manufacturing process.

Therefore, the new Cobra King MIM Tour Irons are a must to have!

Know How to Clean Golf Clubs, a complete thorough guide along with reviews for the Top 5 Golf Cleaners.

Read Reviews From Real Golfers

Picture of I Over Golf Author

Scott Ferguson

Scott is a professional golfer with over a decade experience. He is best known for his expertise in choosing the right equipment to play with. He is now a full-time Golf instructor for adults as well as kids. Apart from reviewing and editing guides on Iovergolf, he also regularly take part in golf events throughout the country and share the wisdom of playing Golf.